Foam Proportioners

This foam inductor is for use on the discharge side of the pump. The design of this low cost unit eliminates the need to either add foam concentrate to the water tank or to run foam mixture through the pump. It can be inserted in the plumbing between the pump outlet and the live reel or other discharge points on the fire engine, or can be inserted in a hose lay. The system is usable with a wide range of nozzles from 6 to 95 GPM. This proportioner maintains continuous foam flow under varying...

Proven, Cost Effective Class A Foam-Making Systems for Urban and Wildland Firefighting Operations. CO-SON Industries variable round-the-pump Foam Proportioner is an effective, inexpensive low maintenance foam eductor which introduces foam on the suction side of most any fire pump. This foam metering (proportioner) device is to be plumbed between the discharge and suction side of the pump. Plumbing tees available.

Checkvalve FVA 160015CV - body is cast from unleaded alloy with two 1/4" drilled and tapped holes. This valve features a non-spin acetal and stainless steel spring. Max pressure 400 psi.

Discharge Tee 1-1/2” NH for Co-Son Industries Pump Foam Proportioners

Tank Sensor PUP 1600LLTS - low level tank switch indicates low level of foam concentrate, side mount.

Suction Tee 2” NPSH for Co-Son Industries Pump Foam Proportioners